Your current location: Home  >  Products  >  Products
Search

Service Hotline

+86 13465772392

Product Details

CH2000-6 Arc Welding Robot

The CH2000-6 is a 6-axis arc welding robot for rebar and steel fabrication — welding, handling and loading in one arm. It reaches 2008 mm, repeats to ±0.05 mm, and carries a rated payload of 6 kg. Joint speeds reach 148°/s on J1 and J2, 247°/s on J3, 385°/s on J4, 444°/s on J5 and 790°/s on J6, with a maximum acceleration of 4.9 m/s². The robot weighs 525 kg, is protected to IP54 on the body and wrist, and runs on the CXR X6 control cabinet. It mounts on the floor, inverted from above, or on its side, so it fits into a welding cell, a cage line or a stand-alone station.

The arm is built for arc welding in a workshop: it holds the torch steady through long seams, repeats the same path every cycle, and keeps working where a welder would tire. The wrist joints reach around the workpiece — J4 ±180°, J5 ±105°, J6 ±550° — and the ±0.05 mm repeatability keeps the weld where the program put it. The robot works in 0–60 °C and up to 75% relative humidity, and runs quietly at under 80 dB. For a rebar yard or steel fabricator that welds cages, frames or pipe gauges all day, the robot replaces hand welding on repetitive seams — one robot, one program, and every weld the same.

Send your workpiece size and welding drawing and we will reply with a quotation within 24 hours. WhatsApp: +86 13465772392.

WS42 CNC Steel Bar Bending Center

Features

1. 6-axis articulated arm

· Six joints (J1–J6) give the torch full freedom around the workpiece: J4 ±180°, J5 ±105°, J6 ±550°, so one robot reaches welds from any angle without repositioning the part.

2. ±0.05 mm repeatability

· The arm returns to the programmed path within ±0.05 mm every cycle, so every weld lands exactly where the program put it, seam after seam.

3. 2008 mm reach, 6 kg payload

· A 2008 mm working radius covers large workpieces, and the 6 kg rated payload carries the torch and dress pack with ease.

4. Fast, quiet joints

· Joint speeds up to 790°/s (J6) and a maximum acceleration of 4.9 m/s² keep cycle times short; the robot runs at under 80 dB(A).

5. Flexible mounting, IP54

· Mounts on the floor, inverted from above, or on its side, and the body and wrist are sealed to IP54 against dust and spatter. Runs on the CXR X6 control cabinet.